by bmat » Sep 15th, '14, 21:12
I have not done it in awhile. But I used to use a copier to make flash paper. There were a few tricks though. First you have to be able to adjust the flow of ink to the page. If you use photo quality it is not going to work. I forget the exact settings but there is a way to use less ink. Then there is the matter of the paper going through the machine. You must firmly attach the flash paper to a regular piece of paper otherwise the flash paper gets stuck in the machine. A piece of tape on the corners will not do it. Usually you have to tape the leading edge and see if that works. It depends on how sensative the copier is. Also as a percaution wait a few moments for the machine to cool between each sheet. I'm not sure a copy machine will get warm enough to ignite flash paper but why take the risk?