"Factory Sealed" -keeping ring on Cap?

Struggling with an effect? Any tips (without giving too much away!) you'd like to share?

Moderators: nickj, Lady of Mystery, Mandrake, bananafish, support

"Factory Sealed" -keeping ring on Cap?

Postby Johnny-M » Dec 3rd, '08, 10:50



Hi!

I was wondering if there is a way to open a Plastic Bottle and keep the ring on the cap so its actually still Factory Sealed after the set up.

hot air blower maybe?

Thanx!
E.

Johnny-M
Full Member
 
Posts: 55
Joined: Nov 18th, '08, 23:36

Postby richard bellars » Dec 3rd, '08, 11:12

you can pry it off without breaking the seal, just pop the thin part over the ridge then unscrew the cap as normal. It happened to me by accident once whilst sipping on a tasty beverage and i've never looked back

richard bellars
Preferred Member
 
Posts: 160
Joined: Nov 6th, '08, 23:45
Location: Kent (30 WP)

Postby Johnny-M » Dec 3rd, '08, 11:28

cool, so again the simplest solution is the best. didn´t think of that.
The effect is going to be so much stronger if the person opens the bottle by herself.

Johnny-M
Full Member
 
Posts: 55
Joined: Nov 18th, '08, 23:36

Postby richard bellars » Dec 3rd, '08, 12:39

everytime. If not you can buy the caps unopened but they would just be doing what i just told you.

Good luck with the routine. Let me know how you get on

richard bellars
Preferred Member
 
Posts: 160
Joined: Nov 6th, '08, 23:45
Location: Kent (30 WP)

Postby Farlsborough » Dec 3rd, '08, 16:22

Dipping it into a mug of boiling water makes this a lot easier by the way.

Farlsborough
 

Postby Johnny-M » Dec 8th, '08, 13:32

Worked great! reactions are actually better when they go and say "yeah, I opened the bottle myself, it was sealed"

I´m going to do the same when I perform "Flow" next time, just waiting for the refill from ebay to set up the gimmick.

thanx

Johnny-M
Full Member
 
Posts: 55
Joined: Nov 18th, '08, 23:36

Postby richard bellars » Dec 8th, '08, 14:56

glad to be of service to you sir. let us know how flow goes.

richard bellars
Preferred Member
 
Posts: 160
Joined: Nov 6th, '08, 23:45
Location: Kent (30 WP)


Return to Support & Tips

Who is online

Users browsing this forum: No registered users and 5 guests